Progressive Cavity Pump Model Reference

SINOR Series

SINOR Pump Series — Technical Parameters

Series	Type	Flow	Pressure	Temperature	Max Viscosity
SGP	General Purpose	0.5–300 m³/h	0–24 bar	0–80 °C	700,000 cps
SGP-B	Bearing Frame	0.5–150 m³/h	0–48 bar	0–80 °C	800,000 cps
SVP	Vertical	0.5–120 m³/h	0–12 bar	0–80 °C	800,000 cps
STP	Rectangular Hopper	0.02–120 m³/h	0–24 bar	0–80 °C	700,000 cps
SSP	Bridge Breaker Hopper	0.5–60 m³/h	0–48 bar	0–80 °C	800,000 cps
SMP	Metering & Dosing	0.1–250 m³/h	0–24 bar	0–80 °C	800,000 cps
SSF	Bearing Frame Rectangular Hopper	0.5–120 m³/h	0–48 bar	0–80 °C	800,000 cps
SFP	Sanitary Food Grade	0.5–50 m³/h	0–24 bar	0–80 °C	800,000 cps
SSV	Servo Precision Screw Valve	0.1–840 ml/min	—	—	—
SDJ	Dispensing Pump	0.12–96 ml/s	18–24 bar	—	—

SGP Series

Full SGP Series Model Specifications

SINOR SGP series covers 40 standard models from 0.25 to 300 m³/h. Models SGP025 to SGP1 use threaded (G) connections; larger models use flanged (DN) connections. All models are available with NBR, EPDM, FKM or HNBR stators and multiple rotor materials.

Model	Pressure (bar)	Capacity (m³/h)	Speed (rpm)	Inlet	Outlet	Motor (kW)
SGP025-2S	0–12	0–0.25	0–350	G1/4	G1/4	0.37
SGP05-1L	0–6	0–0.5	0–350	G1/4	G1/4	0.37
SGP05-2S	0–12	0–0.5	0–350	G1/4	G1/4	0.75
SGP1-1L	0–6	0–1	0–350	G1/4	G1/4	0.75
SGP1-2S	0–12	0–1	0–350	DN50	DN50	1.5
SGP1-4S	0–24	0–0.5	0–250	DN50	DN50	3
SGP3-1L	0–6	0–3	0–350	DN50	DN50	2.2
SGP3-2S	0–12	0–2.5	0–350	DN65	DN65	3
SGP3-4S	0–24	0–1.5	0–250	DN65	DN65	5.5
SGP5-1L	0–6	0–5	0–320	DN65	DN65	3
SGP5-2S	0–12	0–5	0–320	DN80	DN80	4
SGP5-3S	0–18	0–3	0–250	DN80	DN80	5.5
SGP5-4S	0–24	0–2	0–200	DN80	DN80	7.5
SGP10-1L	0–6	0–10	0–300	DN80	DN80	4
SGP10-2S	0–12	0–7	0–300	DN80	DN80	5.5
SGP10-3S	0–18	0–6	0–250	DN80	DN80	7.5
SGP10-4S	0–24	0–4	0–200	DN80	DN80	11
SGP15-1L	0–6	0–15	0–300	DN100	DN100	5.5
SGP15-2S	0–12	0–12	0–300	DN100	DN100	7.5
SGP15-3S	0–18	0–10	0–250	DN100	DN100	11
SGP15-4S	0–24	0–7	0–200	DN100	DN100	15
SGP25-1L	0–6	0–25	0–280	DN100	DN100	7.5
SGP25-2S	0–12	0–22	0–300	DN125	DN125	11
SGP25-3S	0–18	0–15	0–250	DN125	DN125	15
SGP25-4S	0–24	0–12	0–200	DN125	DN125	18.5
SGP50-1L	0–6	0–50	0–280	DN125	DN125	11
SGP50-2S	0–12	0–35	0–250	DN150	DN150	22
SGP50-3S	0–18	0–30	0–230	DN150	DN150	30
SGP50-4S	0–24	0–26	0–200	DN150	DN150	37
SGP80-1L	0–6	0–80	0–280	DN150	DN150	22
SGP80-2S	0–12	0–60	0–280	DN150	DN150	37
SGP80-3S	0–18	0–42	0–200	DN150	DN150	45
SGP80-4S	0–24	0–25	0–150	DN150	DN150	55
SGP120-1L	0–6	0–120	0–250	DN150	DN150	37
SGP120-2S	0–12	0–100	0–270	DN200	DN200	45
SGP120-3S	0–18	0–60	0–180	DN200	DN200	55
SGP120-4S	0–24	0–50	0–150	DN200	DN200	55
SGP180-1L	0–6	0–180	0–220	DN200	DN200	45
SGP180-2S	0–12	0–170	0–220	DN200	DN200	55
SGP300-1L	0–6	0–300	0–220	DN200	DN200	55

1L — Single stage low pressure — up to 6 bar 2S — Two stage medium pressure — up to 12 bar 3S — Three stage medium-high pressure — up to 18 bar 4S — Four stage high pressure — up to 24 bar

Specifications follow the SINOR standard model table. Custom pressure ratings above 60 bar are available on request.

Cross-Reference

OEM Cross-Reference Table

SINOR spare parts and pumps are dimensionally interchangeable with the most common OEM progressive cavity pump models.

SINOR	NETZSCH	MONO	SEEPEX	ALLWEILER
SGP / SGP-B	NM / NE / NEMO	M-series / C	BN / BNG	AE / AEB
STP / SSP / SSF	NM with hopper	H-series	BNG hopper	AERD
SMP	NM metering	Dosing pumps	BTM / Smartmac	AEBDE
SFP	NM food-grade	F-series	BN food-grade	AE food-grade
SVP	NE vertical	Vertical	BN vertical	AE vertical

Part Codes

SINOR Spare Part Numbering

Brand	Code Range	Covered Items
NETZSCH	1001–1016	Stator, rotor, coupling rod, drive shaft, bushing, O-rings, universal joint, retainers
SEEPEX	2001–2004+	Stator, rotor, coupling rod, drive shaft, equal-wall stator, hollow rotor
MONO	3001–3012	Stator, rotor, coupling rod, drive shaft, seal cover, shaft sleeve, clamping band

Cross-reference tables are for general guidance only. Always verify against your pump nameplate model and serial number before ordering.

Need Help Matching Your Model? →